New Arrivals/Restock

Y&H Hybrid Solar Inverter 1KW 1.6KW 1.8KW 3KW 4.2KW 6.2KW 10.2KW 220Vac MPPT Pure Sine Wave Inverter Solar Charger Controller

flash sale iconLimited Time Sale
Until the end
03
11
31

$146.99 cheaper than the new price!!

Free shipping for purchases over $99 ( Details )
Free cash-on-delivery fees for purchases over $99
Please note that the sales price and tax displayed may differ between online and in-store. Also, the product may be out of stock in-store.
New  $293.99
quantity

Product details

Management number 203022793 Release Date 2025/09/21 List Price $147.00 Model Number 203022793
Category

Note:DO NOT CONNECT THE SECOND OUTPUT TO THE GRID,IT WILL DAMANGE YOUR INVERTER

This inverter has been upgraded with 2*MPPT, please feel free to buy it!

Dual AC output: under normal conditions, the main circuit and secondary circuit outputs are used normally. When there is no PV and mains power input and the battery voltage is too low, the main circuit is disconnected and only the secondary circuit output is retained to save power.

Otherwise, you don't need to connect to the second output.Features of 48V DC solar power inverter:
Daul PV In-Put and Second Output
160A 10.2KW on/off Grid Inverter
1.Pure sine wave solar inverter(on/off Grid)
2.Inverter running without battery
3.Output power factor 1.0
4.High PV input voltage range(90~500VDC)
5.WIFI&GPRS available for IOS and Android
6.Built-in anti-dusk kit for harsh environment
7.Built-in 160A(for 10.2KW)MPPT solar charge
8.Smart battery charge design to optimize battery life
9.One-click restoration to factory Settings
10.Dual output
11.Built-in Lithium battery automatic activation
12.Touch buttom
 
Basic System Architecture:
The following illustration shows the basic application for this inverter/charger. It also includes the following devices to have a complete running system:
1.Generator or Utility.
2.PV modules Consult with your system integrator for other possible system architectures depending on your requirements. This inverter can power all kinds of appliances in-home or office environment, including motor-type appliances such as tube lights, fans, refrigerators, and air conditioners.Pure sine Wave Inverter:
10200KW Pure sine Wave Inverter is a new all-in-one hybrid solar inverter charger, Support dual PV input, dual MPPT voltage tracking.RGB lingthing for different working mode(Purple-PV Mode;Red-Battery Mode;Blue-Utility Mode)Four modes can be choose when charging battery:
Utility first: Utility will charge battery as first priority source, then Solar Power.
Solar first: Solar will charge battery as first priority source, then Utility Power.
Solar and Utility(default): Solar Power and Utility power will charge battery at the same time.
Only Solar: Solar Energy as the only source charge battery.
Three Output modes can be choose:
Utility first (default):Utility will provide power to theloads as first priority, Then Solar Power, battery Power
Solar first: Solar energy provides power to the loads as first priority. If solar energy is not sufficient to power all connected loads, utility will supply power to the loads at the same time,then battery power.
SBU Priority: Solar energy provides power tothe loads as first priority. If solar energy is not sufficient to power all connected loads, battery energy will supply power to the loads at the same time.New features:
Built-in BMS function. Lithium Battery Activation, has a reactivation feature to awaken a sleeping lithium battery. The small charge current to activate the protection circuit and if a correct cell voltage can be reached, it starts a normal charge.Dual AC output, one for the main load (UPS function), one for the conventional loadWIDE RANGE OF USES:

MPPT Inverter Charger Pure sine Wave 10200W for RV Camping Boat Home Emergency ect.. Can be accessed to a variety of household and office loads, including Oven, rice cooker, lamps, televisions, fans and other AC loads.(Be careful not to install it near the bedroom, the fan will make a sound when the inverter is running. Avoid affecting your rest

Parameters:

INVERTER MODEL

8.2KW

10.2KW      

Output Voltage Waveform

Pure Sine Wave

Output Voltage Regulation

230Vac±5%

Output Frequency

50Hz

Peak Efficiency

93%

Nominal DC Input Voltage

48Vdc

High DC Recovery Voltage

62Vdc

High DC Cut-off Voltage

63Vdc

No Load Power Consumption

70W

75W

Two Load Output Power

Full Load

8200W

10200W

Maximum Main Load

8200W

10200W

Maximum Second Load(battery model)

2733W

3400W

Main Load Cut Off Voltage

44VDC

Main Load Return Voltage

48VDC

Utility Charging Mode

AC Charging Current(Max)

140Amp

160Amp

Floating Charging Voltage

54Vdc

MPPT Solar Charging Mode

Max.PV Array Power

8200W

10200W

Nominal PV Voltage

360Vdc

PV Array MPPT Voltage Range

90Vdc~500Vdc

Max.PV Array Open Circuit Voltage

500Vdc

Max Charging Current
(AC charger plus solar charger)

160Amp

160Amp

Grid-Tie Operation

Nominal Output Voltage

220/230/240VAC

Feed-in Grid Voltage Range

195~253VAC

Feed-in Grid Frequency Range

49~51±1Hz/59~61±1Hz

Nominal Output Current

35.6A

44.3A

Power Factor Range

>0.99

Maximum Conversion Efficiency
(DC/AC)

98%

General Specifications

Safety Certification

CE

Operating Temperature Range

-10℃ to 50℃

Storage temperature

-15C~60℃

Humidity

5%to 95% Relative Humidity(Non-condensing)

Dimension(D*W*H),mm

537*390*130

Net Weight,kg

14.2

14







Correction of product information

If you notice any omissions or errors in the product information on this page, please use the correction request form below.

Correction Request Form

Product Review

You must be logged in to post a review