New Arrivals/Restock

Sealed-Combustion direct-vent model, Glass-lined tank, premium grade anode rod protects against tank corrosion, 2” Non-CFC foam insulation, factory installed temperature and pressure (T&P) relief valve, factory installed 3/4 inch PEX polymer-lined nipples allow easy water connection hook-up, heater application typically for installation within an interior (inside) closet with hole in floor that allows outside air supply for fuel combustion, air-supply piping not provided by factory, Roof Jack vent kit Ace 4737656 (sold separately, but required), Ace 4736756 is required whenever selling either Ace 4588604 or 4588661, vent piping connects directly on top of heater without use of drafthood, must be installed in accordance with instructions furnished with the heater, No other Roof Jack Kits are approved for installation with this heater, however, longer adjustable length, up to 95”, roof-jack vent kits are available from Reliance, Heater is 20 inch Diameter, 58-3/4 inches to Top of Heater Jacket, No Draft Hood Venting Allowed, .62 Energy Factor, READ INSTRUCTION MANUAL BEFORE INSTALLATION, Qualified and trained professional installer of mobile-housing heaters highly recommended, NOTE: Contact Local Gas Utility provider for installations above 5,400 feet

• UPC: 091193004043
• Manufacturer Part No: 6-40-MDV 250

• Brand Name: Reliance
• BTUs: 32000 BTU
• Tankless: No
• Power Source: Natural Gas/Propane
• Product Type: Mobile Home Water Heater
• Water Connection Location: Side
• Low NOx Burner: Yes
• Maximum Elevation: 5400 ft.
• Commercial or Residential: Residential
• CSA Listed: Yes
• Water Connection Size: 3/4 in.
• Temperature Pressure Relief Valve: Yes
• Gas Connection Size: 1/2 in.
• Maximum Pressure: 150 psi
• Vent Diameter: 3 in.
• Energy Star Certified: No
• Diameter: 20 in.
• Depth: 20 in.
• Width: 20 in.
• Tank Capacity: 40 gal
• Warranty: 6 yr
• Maximum Temperature: 155 °F
• Minimum Temperature: 55 °F
• Amps: 0 amps
• Height: 58-3/4 in.
• Volts: 0 V