ANYCUBIC Wash & Cure Plus 3.0, Large Size for Anycubic Mono M5s LCD MSLA SLA 3D Printer, Powerful Curing Light, Improved IPA Usage, Cleaning Volume 8.97''x5.03''x10.23''

Brand: ANYCUBIC

Color: Yellow

Features:

• 【Size Upgraded, Capacity Increased】Compared with Anycubic wash & cure plus, wash and cure 3 plus’s washing basket volume is increased by about 13.4% to 7.6L, and total volume of the washing bucket is 12L, which is suitable for LCD 3D printers of 10.6'' and below.
• 【Partial Enhanced Curing】The innovative Flexicure gooseneck lights increases the energy value by 30,000uW/cm²over a 1-3 cm irradiation range, thus taking good care of delicate areas such as the top of the model or figure details.
• 【Better Overall Curing】Anycubic Wash & Cure 3 Plus adopts a brand-new arrangement of lamb beads combined with a lens light source. It offers a 20% improvement in curing uniformity compared to wash&cure plus, thus 3d models can achieve better quality and consistency after curing.
• 【Dual-Layer Design, Saving and Efficient】The platform cleaning mode of wash & cure 3 plus is equipped with two adjustable heights of 150mm and 250mm, allowing the printing platform to range from 6.6'' to 10.3'', maximizing IPA usage efficiency.
• 【Simple Operation, Easy to Use】Cleaning and curing dual mode in wash and cure 3 plus, easily selected with one click; Enhanced Gooseneck light curing mode can be easily toggled on and off with one click. Cleaning and curing time can be easily adjusted from 1 to 30 minutes at will.

Part Number: BR-lcd166541